| SKU |
 |
 |
 |
 |
 |
 |
 |
 |
Price in MDL | |
|---|---|---|---|---|---|---|---|---|---|---|
| 749 075 | 75 | 31 | 103 | 30 | 92.5x64 | 73x44.5 | 12x8.5 | 100 | 70 MDL | Add to cart |
| 749 100 | 100 | 32 | 130 | 36 | 92.5x64 | 73x44.5 | 12x8.5 | 130 | 100 MDL | Add to cart |
| 749 125 | 125 | 32 | 155 | 33 | 92.5x64 | 73x44.5 | 12x8.5 | 150 | 120 MDL | Add to cart |
Industrial swivel caster with brake «special» 7497
Medium duty series «special» 749 — is a series of industrial casters with a polyurethane tread. The caster rim is made of polypropylene. The casters feature increased wear resistance; absorb vibration well; do not damage or stain floors; do not leave braking marks; are low-noise in motion; and are resistant to water, fats, oils, and acids.
Temperature range: from -25°C to +50°C
The swivel caster with brake is equipped with a bracket whose swivel head contains a double-row ball bearing, allowing the direction of travel to be changed. It is used to provide trolleys and equipment with maneuverability. Casters with brakes are used to improve safety when parked on an inclined surface.
The medium duty polyurethane caster series is used for equipping commercial equipment and in the food service sector.
CASTERS MADE OF POLYURETHANE PU (red) / POLYPROPYLENE PP (black)
• Swivel bracket with brake made of galvanized steel, 2.5 / 3.0 mm thick.
• Platform mounting with 4 holes.
• Double-row ball bearing in the swivel head.
• Tread made of polyurethane PU (red), does not leave marks on the floor surface, resistant to abrasive wear.
• Rim made of polypropylene PP (black).
• Roller bearing in the axle provides excellent axial and radial load capacity
• Medium duty industrial casters. Load capacity up to 150 kg.
• Food service.
• Storage racks, shelves, warehouse and transport trolleys in the food service sector.
• Shopping trolleys.
Information about casters and operating conditions
• Casters are replaceable technical components mounted on equipment, platform carts, and similar devices to provide mobility. This information applies to swivel casters intended exclusively for use on non-motorized transport units and equipment (hereafter referred to as “units”) that are typically stationary and moved at speeds not exceeding 4 km/h.
• Operating conditions primarily include technically correct installation:
– The caster must be securely attached to the unit at all designated mounting points.
– Swivel casters must be installed with their swivel axis in a vertical position.
– Fixed (rigid) casters must be mounted so that their wheel axes lie on parallel lines.
– All swivel casters installed on a unit must be of the same type.
– The load on a single caster is calculated using the formula:
Q = ((M + m) / (n – 1)) × W
Where:
Q – load on one caster
M – weight of the transported load
m – weight of the cart
n – number of casters
W – safety factor (>1 under non-standard operating conditions)
• The caster, bracket, braking and locking systems, as well as the wheel axle, form a single functional assembly.
• A necessary condition for proper caster selection is the availability of data on all potential loads.
