| SKU |
 |
 |
 |
 |
 |
 |
 |
 |
Price in MDL | |
|---|---|---|---|---|---|---|---|---|---|---|
| 748 075 | 75 | 31 | 103 | 507 | 92.5x64 | 73x44.5 | 12x8.5 | 100 | 50 MDL | Add to cart |
| 748 100 | 100 | 32 | 130 | 507 | 92.5x64 | 73x44.5 | 12x8.5 | 130 | 60 MDL | Add to cart |
| 748 125 | 125 | 32 | 155 | 507 | 92.5x64 | 73x44.5 | 12x8.5 | 150 | 75 MDL | Add to cart |
Industrial fixed caster «special» 748
Medium duty series «special» 748 — is a series of industrial casters with a polyurethane tread. The caster rim is made of polypropylene. The casters feature increased wear resistance; absorb vibration well; do not damage or stain floors; do not leave braking marks; run quietly; and are resistant to water, fats, oils, and acids.
Temperature range: from -25°C to +50°C
The fixed caster is used to change the maneuverability of trolleys or to ensure stable straight-line movement.
The medium duty polyurethane caster series is used for equipping commercial equipment and in the food service sector.
CASTERS MADE OF POLYURETHANE PU (red) / POLYPROPYLENE PP (black)
• Fixed bracket made of galvanized steel, 2.5 / 3.0 mm thick.
• Platform mounting with 4 holes.
• Tread made of elastic polyurethane PU (red), does not leave marks on the floor surface, resistant to abrasive wear.
• Rim made of polypropylene PP (black).
• Roller bearing in the axle provides excellent axial and radial load capacity.
• Medium duty casters. Load capacity up to 150 kg.
• Food service.
• Storage racks, shelves, warehouse and transport trolleys in the food service sector.
• Shopping trolleys.
Information about casters and operating conditions
• Casters are replaceable technical components mounted on equipment, platform carts, and similar devices to provide mobility. This information applies to swivel casters intended exclusively for use on non-motorized transport units and equipment (hereafter referred to as “units”) that are typically stationary and moved at speeds not exceeding 4 km/h.
• Operating conditions primarily include technically correct installation:
– The caster must be securely attached to the unit at all designated mounting points.
– Swivel casters must be installed with their swivel axis in a vertical position.
– Fixed (rigid) casters must be mounted so that their wheel axes lie on parallel lines.
– All swivel casters installed on a unit must be of the same type.
– The load on a single caster is calculated using the formula:
Q = ((M + m) / (n – 1)) × W
Where:
Q – load on one caster
M – weight of the transported load
m – weight of the cart
n – number of casters
W – safety factor (>1 under non-standard operating conditions)
• The caster, bracket, braking and locking systems, as well as the wheel axle, form a single functional assembly.
• A necessary condition for proper caster selection is the availability of data on all potential loads.
